- 01279 430831
- Contact us
- My Account
- Description
-
Details
Features- Integral Sensor
- Compact
- Durable
- Accurate
- LCD readout
Applications
- Window FilmTests
- Low Level UV from household lamps
- Groundlevel UV from stadium lighting
- Outdoor Shady area readings
Solarmeter Specifications
RadiometerModel 5.7 Irrad. Range 0-1999 µW/cm² Total UV Response 280-400 nm (UVB thru UVA) Resolution 1 µW/cm² Conv. Rate 3.0 Readings/Sec Display 3.5 Digit LCD Digit Size 0.4 inch high Oper. Temp 32° F to 90° F Oper. Humid. 5% to 80% RH Accuracy ±10% REF.NIST Dimensions (in.) 4.2L x 2.4W x 0.9D Weight 4.5 OZ. (incl. batt.) Power Source 9-Volt DC Battery Lens UVT Acrylic .030 Diffuser Virgin Teflon .010
Proper Usage of Solarmeter ® Ultraviolet Radiometer for low level UV measurements.Sensor
Hamamatsu #G5842 UV SENSOR/FILTER
The G5842 is a semiconductor UV sensor consisting of a GaAsP photodiode chip and a UV filter. The G5842 is completely insensitive to visible light longer than 400 nm and infrared radiation since its spectral response covers only the UV region from 260 to 400 nm. Applications of the G5842 include solar UV detection, as the spectral response is well matched to the solar UV spectrum.
Operation
Press and hold push-button switch on face of unit. Aim sensor window in top panel of meter directly at UV source. Note reading on LCD and record if desired.
Battery operation voltage is 9V down to 6.5V. Below 6.5V the LCD numbers will begin to dim, indicating the need for battery replacement. Under "typical" service load, the battery should last about 2 years.
- When checking home, business, school, or car window UV transmission, take reading through window or film and compare to outdoor reading. Note: The sensitive Model 5.7 reading only goes up to 1999 uW/cm², wheras full sunlight can exceed 5000 uW/cm²... or 5.0 mW/cm² on a Model 5.0 meter.
- For household lighting including compact fluorescents, take reading near lamps and again at several inches or feet distance, to see how far away the UV falls below 1 uW/cm².
- For gym or stadium lighting take readings at floor level. If concerned about amount of UV, ask the owners to have UV-block shields installed under the lamps.
- Do not subject the meter to extremes in temperature, humidity, shock or dust. Store meter away from humidity when not in use.
- Use a dry, soft cloth to clean the intrument. Keep sensor free of oil, dirt, etc.
- Integral Sensor
